blue silicone wristbands

design how many forms,how to make friendship bracelets with names

orm of digital communication, which played an important role in the early radio and was known to every radio communicator. As a result of advances in communication technology, Morse codes were discontinued in 1999. We can customize bracelet with the morse code on. The band can be solid, swirled, segmented,  glowing and UV transfer. Morse code can be printed, colorfilled, embossed printed. Regular sizes of a rubber bracelet are 6”(150mm) for toddler, 7”(180mm) for youth, 8”(202mm) for adult in circumference and 1/4”(6mm), 1/2”(12mm), 3/4”(19mm), 1”(25mm) in width. We make it all together 2mm thickness. Order less than 100pcs, get 50pcs free and 5pcs keychains free. Order 100pcs or more, get 100pcs free and 10pcs keychains free. All the free wristbands and keychains are same design of the one you order.    

e of you how to make friendship bracelets with nameswrist, a new mould must be made to match it. Second, choose your band color and logo color. Variety of colors in the www.pantone-colours.com to match your favourite. The band can be swirl, segment or solid. Third, choose the band and logo style. The band can be figured as you request. The logo can be printed, debossed or embossed with color or not. The fourth, of course pay for it. Regular sizes of a silicone wristband are 6”(150mm) for toddler, 7”(180mm) for youth, 8”(202mm) for adult in circumference and 1/4”(6mm), 1/2”(12mm), 3/4”(19mm), 1”(25mm) in width. We make it all together 2mm thickness. Regarding with the circumference, it is the most important factor to choose size in our order. It is the average sizes for toddler, youth and adult. The direct way to choose size is to measure the size of your wrist before selecting. If all the above sizes do not fit you, it is available for custom size. Our mould machine is updated to make variety of sizes. There are 4 styles mainly. They are solid, swirled, segmented and glow. The logo can be colored of all pantone colors, normally you can select only one color for the logo or message on one design. It seems easy. Don’t wait and go for it on www.silicon-wristband.com  

artwork includes the information of order number, size, logo style, order quantity and other options like glowing and individual pack. Make the mould or film. A mould is needed for debossed, embossed, colorfilled styles. We make a mould and set it in the machine, the high temperature of about 200℃ will solidify rubber into the sharp of bracelet. A film is functioned like a mould but it is for printed wristband only. It transfer the ink to the surface of bracelet as logo and wording. Prepare the rubber material. A rubber bracelet is mainly made from silicone rubber, and some other accessories like curing agent which solidify the soft rubber, and Color masterbatch which makes bracelet colored. We will mix these material evenly in a blender. It comes out a ball of rubber. We need to measure it into blocks of almost same weight which as much as the weight of a wristband. Produce bracelets by the mould. As we mentioned before in 2nd and 3rd step, we will transfer  the blocks to bracelets by a set of moulding machine of high temperature. When it cool down, it gets the characteristic of a bracelet, smooth and strengthened. Edge cutting. A semi-product of rubber bracelet has rough edges, we have to cut it off. The rough edge is cut by machine. It will be good. Color the logo and wording. The bracelet comes out from moulding machine without colors on the logo and letterhow to make friendship bracelets with namesing. We have to fill the ink or print the ink on the bracelet. Different style has different way of printing. Clean the product. As the bracelet has static electricity, dust will be on the surface and hard to move off. So we need to clean the bracelet before packing. We usually wash it with water once. After washing, we will check the quality. Packing and delivery.    

rubber wristbands custom